![]() The IP-address tends to be printed on the bottom of the router. How to set it up depends on the device and brand, but generally you will connect to the router by typing in its ip-address in the browser. If you want to create a wireless network you will have to have a device that broadcasts Wi-Fi, such as a Wi-Fi router. To set up a static IP-address on your Raspberry Pi, follow these steps. On a windows PC, go to the Network and Sharing Centre in the control panel and select Set up a new connection or network and follow the steps. On a Mac, go to System Preferences > Network > Built-in Ethernet > Advanced where you can set up your network. The first thing to do is set it up on your host computer. I tend to prefer to have a static network as it can make it easier to find and connect to your devices as upon restarting the whole system Raspberry Pi’s may change (and swap) their IP-address. ![]() In contrast, a network switch will allow connected devices to talk to each other but will not automatically assign IP addresses so works better when connected to a router or for setting up a static network. You will need to do this by connecting it to a computer via an ethernet cable.Ī router will automatically handle assigning IP-addresses to each device on the network. If you are working with a new network switch or router, the first thing to do is set it up. For security reasons one may also decide to not have all units but only the host computer connected to the internet. The most simple network only needs a network switch (not a router) but won’t be able to connect to the internet. If you have a lot of devices and plan to use ethernet connections you will need to get a network switch as a router only tends to have a maximum of four ethernet ports.ĭetermine if you want your devices to have internet access or not. A wireless network will be easier to set up physically but a wired (ethernet) network will provide a more stable and high-bandwidth connection. The minimum you will need for a LAN is a (wireless) router and/or a network switch. A LAN is a great way to control an array of Raspberry Pi’s from a central computer, and for example have all Raspberry Pi’s store their data on a large NAS drive on the network. A LAN can be connected to the internet or be completely separate from it. It is basically like the internet, just a lot smaller, with a group of devices all connected to each other. Below I guide you through all the steps to set one up. A great way to work with arrays of Raspberry Pi’s, is to create a dedicated local network.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |